End user terminals
Operator equipment


Odín is a cost effective, high performance satellite router for hybrid Internet over satellite services. DVB-S2/ACM is used for downlink and can be combined with a variety of terrestrial return channels. Depending on the method used for the return channel, Odin will either integrate a mobile network interface (3G/GPRS USB dongle) or an internal dial-up modem.


Odín is designed to operate with broadcasting satellites; it is equipped with a state of the art DVB-S2 demodulator and advanced IP over satellite optimization tools. The principles of its implementation make Odín the most flexible and cheapest hybrid broadband modem in the market.










Click for technical specifications



Integrated web based (http) user interface.

No software/drivers need to be installed on connected computers.

An integrated DHCP server provides private IP addresses to all connected computers.

Linux based operating system.



Hybrid Internet over satellite

Satellite multicast reception



Up to 60 Mbit/s from satellite to LAN


Processor & Memory

Ali M3527 SOC

512 MB DDR3 1600Mhz RAM

256 MB non-volatile flash memory


Satellite front-end

Support for DVB-S2/ACM and DVB-S

Input frequency range: 950 MHz to 2150 MHz


Symbol rate support:

1-68,4 Msym/s (QPSK, 8PSK, 16APSK)

1-53.9 Msym/s (32APSK)


Modulation support: DVB-S2 modcod range



Ethernet ports for WAN and LAN

Wi-Fi Access Point 802.11b/g/n/ac, 2T2R



Linux operating system

Web based user interface

Integrated client for the Mimir HUB

DHCP server for simple IP address management


Front Panel

1x LED for power

1x LED for return channel connection

1x LED for Mimir connection

1x LED for satellite lock


Power Supply

External AC/DC converter: 230VAC/12VDC 2A


Mechanics (excluding connectors)

HxDxW: 205x145x38


Connectors / Rear Panel

1x RF input connector, F connector (75 Ohm) for satellite feed

2x Ethernet ports, 100Mbit/s (RJ-45)

2x USB-A 2.0 (device) ports

1x Mains AC/DC power supply adapter inlet 12V through DC plug

1x Factory reset button



User manual in English

Optional accessories (extra cost):

Ethernet cable (2m)

Power supply


Supported USB Dongles

Supported USB dongles (3G/EDGE/GPRS)



E173u (12d1:1436)
E173s (12d1:1c05)
E173s (12d1:1c10)
E173s (12d1:1c23)
E169/E620/E800 (12d1:1001)
E1820 (12d1:14ac)
E3131 (12d1:151d)
Preconfigured Hi-Link dongles



MF190 (19d2:0117)
MF190 (19d2:0031)
MF190 (19d2:0154)
MF636 (19d2:0033)



ZD Incorporated (0685:7000)
NetworkConnect MT6229 (2020:2000)



Close technical specifications